LED  Thermal  Solution  Leading  Provider

            Where To Buy             how to make coca cola soda cooler dispenser fountain machine-Mingfa Tech-img+86-769-39023131      video-how to make coca cola soda cooler dispenser fountain machine-Mingfa Tech-imgsales@mingfatech.com

how to make coca cola soda cooler dispenser fountain machine

by:Mingfa Tech     2019-12-15
The Coca Cola soda cooler dispenser fountain machine is a portable device that can be used as a cooler to cool the temperature of the Coca Cola soda drink, which can be distributed by the tap.
The device can be used as a portable water dispenser or as a small freezer/refrigerator. So Lets Start! ! !
The Coca Cola soda cooler dispenser fountain machine is a portable device that can be used as a cooler to cool the temperature of the Coca Cola soda drink, which can be distributed by the tap.
The device can be used as a portable water dispenser or as a small freezer/refrigerator. So Lets Start! ! !
Required parts: Take a cylindrical container that you want to make as a dispenser container and we choose plastic as it is easy to cut and reshape.
Now measure the space needed at the bottom of the cylindrical container that the radiator will get and cut the shape accordingly.
Now, cut the diameter of the round distributor tap on the surface of the cylindrical container as required.
You can take away any water dispenser faucet with threaded screws and make sure that you have cut it in the water dispenser container according to the diameter of the tap threaded screws.
Now, unscrew the tap in the slot made for it in the dispenser container.
The screws should be as tight as possible, otherwise our Coca-Cola/soda/water could leak from this loose space.
Required parts: Take the Radiator cut in shape at the bottom of the cylindrical container and properly install/place the radiator in the desired position within the container.
Glue the radiator with a cylindrical container using epoxy compounds and keep it dry 8-
10 hours, make sure the epoxy is placed correctly, otherwise our Coca-Cola/soda/water can leak from the gap on the left.
Apply some heat transfer oil on the flat surface of the radiator and place our cooling module I.
E. Thermoelectric Peltier cooler module (TEC1-12715)
Pay attention to the printing surface of TEC1-
12715 should be placed on the side of the thermal grease/container.
Required parts: now apply some hot grease on top of Peltier TEC1
12715 module and put the CPU radiator/radiator on it.
Tighten it with a nut.
With two 12 v dc fans, mounted on the side of the CPU radiator, this will absorb all the heat from the radiator and cool.
All red welding now (Positive)
The wires of Peltier and DC fans are made into a common forward terminal, and all black colors are also welded (Negative)
The wires of Peltier and DC fans form a common negative terminal.
These positive and negative temperatures will be used to provide current to our cooler.
Connect these terminals to a 12 v SMPS power supply or a 12 V battery, especially a car battery.
Add Coca-Cola soda to the dispenser as per your requirements and you will add more time to cool the drink. Yeppiee! ! !
Our Coca-Cola soda cooler dispenser is ready! ! !
Finally, power up your Coca-Cola soda cooler and enjoy your frozen drink! ! !
Note: This device can be used as a portable water dispenser and a small freezer/refrigerator.
Custom message
Chat Online 编辑模式下无法使用
Chat Online inputting...