- COB LED Heat Sink
- SMD LED Heat Sink
- HibayLED Heat Sink
- Lighting Housing
- Grow Light
- Commercial LCD Display
how to change your computer\'s heat sink by otis cooper
If the heat is not removed in time, any computer parts will be destroyed.The CPU chip is one of the main components that generate heat in the system.
The radiator has all the important tasks of keeping the CPU chip cool and therefore does not overheat.Sometimes the radiator may not be able to complete its work and must be replaced.
Replacing the radiator on the CPU or CPU chip is a simple task.Best of all, you just need a small screwdriver, cotton swab and some rubbing alcohol.
Change the radiator remember to consider safety first.This means that you want to make sure you have clean hands, clean workplaces, and remove all static electricity on your body by touching the door handle or any other metal object.
Once you have the right work area and clean hands, you should also have a clean and right mind now.Make this task both educational and fun.To change the radiator, do the following.
Step 1.Unplug the computer and remove the lid from the system unit chassis.
Step 2.Find the CPU chip and the radiator is on it.Find the wires on the motherboard and unplug them very carefully.
Step 3.Remove the old radiator and cooling fan assembly.Most Pentium-based computers will have two levers that lock the radiator in place.
On older Pentium computers, AMD Athlon, and Duron processors, look for ZIF or zero-socket sockets to install the processor.
Gently loosen the clip by sliding a very small screwdriver blade under the clip and lift the radiator from the CPU.Be careful here, won\'t you damage the cpu chip in any way?
Step 4.Once the old radiator is removed, clean up the old hot paste with a cotton swab and rubbing alcohol.Give the CPU time to dry.
Step 5.Grab some hot paste and squeeze slightly to the top of the CPU.Only thin enough layers are placed between the CPU and the radiator.
Step 6.Before installing the new radiator, clean the bottom with some warm soapy water.Check before installing the radiator to make sure it is dry.
Step 7.Please line up carefully if ZIF socket and processor are equipped.If the computer has an updated Pentium or Athlon-based chip, lock the two clips that hold the assembly.
Step 8.With the CPU and radiator firmly in place, it\'s time to re-The fan wire connecting the cooling fan.Insert the component into the motherboard.
Step 9.Check, double check, and then check some more to make sure all connections are in place.See if the radiator assembly is well secured in the socket.
Step 10.Now, replace the system unit cover and insert any peripherals you disconnect.Starting the PC, the computer should now be aware of a new device in its system.
After starting the computer, check to make sure the operating system is working properly.If possible, look at the back of the computer and see if the fan is working properly.
The central processor is not the only heating part in the computer.But since it is the brain of any computer, you want to make sure that the radiator performs the best.
Take the time to learn the process in detail by removing the chassis and looking at the radiators in your own computer.If you need to replace the radiator in the future, knowing how to perform this task can save you money.