Discussion of High Power LED Cooling

Discussion of High Power LED Cooling

Monday, 22 January 2018 by
Let’s discuss the importance of high-power LED cooling. The power of traditional die is relatively small, need not much of heat dissipation, so there is not any serious problem in LED cooling, but the high-power LED is different, its chip power density is very big. At present, due to the semiconductor manufacturing technology, about above 80% input power
5.Design and Assembly

Detailed of LED cooling

Friday, 19 January 2018 by

As we all know, the traditional meaning of the dissipate heat is the so-called transfer of heat, and the principle of heat transfer has the following three points: conduction, radiation and convection. Now the most used lamps is the heat conduction, there have three points affected heat conduction, materials, structure, size. Speaking of materials, about the component that

With the extended lifetime and lower costs as compared to traditional lamps, LED lighting has begun to spread more efficient light into the homes of the globe. But, what decides the quality of LED lamps and what do you need to know before converting to LED? Let us know more in this blog.   LED-

mingfatech-1-18-1

LED is good or not that mainly to see the light failure, when light failure is smaller the LED chip is more better. Then how to make decline of light failure, it depends on what kind of heatsinks for LED.   There we mainly talk about the indoor spotlight with the heat conduction independent cooling.

What Matters The Most While Buying A LED

LEDs have become very popular. They are a great improvement over the traditional lights being used. They have a longer life as compared to the traditional lamps being used. They are also more efficient as their consumption of electricity is lesser than the bulbs. LED Life One of the major concerns while buying LEDs is

What Matters The Most While Buying A LED

Why does LED need cooling?

Friday, 12 January 2018 by

With the continuous development of technology, LED is break light failure, cooling, light efficiency and other issues. LED thermal management is the most difficult part of the new LED lighting. If without adequate heat dissipation management, it will cause lighting failure or fire.   LED is a light source, and LED cooling is directly contacted

This LED cooler is WAVY-COOL

This LED cooler is WAVY-COOL

Wednesday, 10 January 2018 by

In the lighting industry, LED cooling is the biggest technical problem of LED lighting. The heat produced by LED chip is always scattered to the air through the shell of the lamp. If LED cooling is not good, for the LED chip heat capacity is small, a little bit of heat will accumulated to make

The most waterproof LED cooler on the market

As LEDs are gradually replacing incandescent lamps, halogen lamps, and even fluorescent lighting, but making property LED cooling solution to ventilate and cool the cooling system is critical to every application. The heat dissipates from the back of the LED and requires a passive or active thermal solution to properly dissipate heat. LED heatsinks solves the thermal

Cooling-and-Thermal-Management

As we all know, the life span of an LED depends on the semi-conductor material used as well as the current/heat relationship. The light output of the LED becomes weaker and weaker and lifetime has been reached the desired level once it reaches 50% of its initial value. A life span of a few hundred and

With the continuous improvement of the efficiency of LED products, besides with the color tolerance (SDCM) control ability and color rendering improved, LED manufacturers begin to interest in the high-end commercial lighting market demand. At the same time, Led lighting manufacturers are aware of market factors in addition to product prices, but also noticed that

X4530

xLED-4530 Pin Fin Heat Sink Φ45mm

Tuesday, 25 April 2017 by

* Mechanical compatibility with direct mounting of the LED modules to the LED cooler and thermal performance matching the lumen packages. * Thermal resistance range Rth 6.4°C/W. * Modular design with mounting holes foreseen for direct mounting of a wide range of LED modules and COB’s: * Diameter 45mm – Standard height 30mm , Other

x60301

xLED-6030 Pin Fin Heat Sink Φ60mm

Tuesday, 25 April 2017 by

* Mechanical compatibility with direct mounting of the LED modules to the LED cooler and thermal performance matching the lumen packages. * Thermal resistance range Rth 4.2°C/W. * Modular design with mounting holes foreseen for direct mounting of a wide range of LED modules and COB’s: * Diameter 60mm – Standard height 30mm , Other

TOP